About Packet Power Node Manager
The Packet Power Mobile App allows you to communicate with Packet Power wireless monitoring modules and modify select configuration settings.
Only certain modules and firmware versions are compatible with this app and your EMX account must be properly configured to use the app.
Hardware & Firmware Compatibility
- Packet Power uses a simple X.Y notation to denote F/W image (X) and F/W version (Y) number; for example, 5.40 denotes F/W image number 5, version number 40
- The F/W image number is hardware specific and does not change with upgrades, only the version number does
- Nodes with F/W image numbers that ARE NOT listed below (e.g. 2.x) do not have the hardware necessary to communicate with the app.
- Nodes with F/W image numbers that ARE listed below but have lower F/W version numbers (e.g. 5.40) do have the necessary hardware, but have to be upgraded in order to communicate with the app. Please contact support@packetpower.com for F/W upgrade information.
F/W Image# |
Node Type |
Minimum F/W Version # required for app support |
Android |
iOS |
5.x | AC Power | 5.44 | 5.42 |
14.x | Environmental | 14.18 | 14.18 |
21.x | Environmental | 21.26 | 21.26 |
22.x | AC Power | 22.18 | 22.16 |
23.x | AC Current-Only | 23.22 | 23.22 |
29.x | DC Power | 29.12 | 29.12 |
30.x | DC High Voltage | 30.12 | 30.12 |
34.x | AC Power | 34.8 | 34.6 |
35.x | AC Power | 35.8 | 35.2 |
36.x | Wireless network connector | 36.14 | 36.14 |